Druckminderventil für Wasser, PN 25 Gehäuse aus Rotguss Federhaube aus Messing (bis G 1 ¼") Federhaube aus Grauguss (ab G 1 ½") mit Schmutzfängersieb aus Edelstahl Vordruck: 2,5 - 25 bar Hinterdruck: 1,5 - 9,0 bar beiderseits mit Manometeranschluss G ¼" beiderseits Messing-Verschraubungen mit Aussengewindetüllen (Löttüllen auf Wunsch) Mindestdruckdifferenz: 1 bar Max. Temperatur: 75° C |
pressure reducing valve for water, PN 25 body in bronze bonnet in brass (up to G 1 ¼") bonnet in cast iron (from G 1 ½") with screen in stainless steel inlet pressure: 2,5 - 25 bar outlet pressure: 1,5 - 9,0 bar with gauge thread G ¼" on both sides with brass screwed fittings with male sockets (soldered sockets on request) minimum pressure difference: 1 bar max. temperature: 75° C |
Materialspezifikation: |
material specification: |
Gehäuse: |
CuSn5Zn5Pb5-C |
CC491K |
Oberteil: (bis G 1 ¼") |
CuZn39Pb2 |
CW612N |
Oberteil: (ab G 1 ½") |
EN-GJL-250 |
EN-JL1040 |
Dichtungen: |
Perbunan |
NBR |
Membrane: |
Perbunan |
NBR |
|
body: |
CuSn5Zn5Pb5-C |
CC491K |
bonnet: (up to G 1 ¼") |
CuZn39Pb2 |
CW612N |
bonnet: (from G 1 ½") |
EN-GJL-250 |
EN-JL1040 |
sealings: |
perbunan |
NBR |
diaphragm: |
perbunan |
NBR |
|
G ½ G 1 ¼" |
G 1 ½" G 2 ½" |
Type 110408 |
Einbaulage: beliebig ab G 1 ½" bevorzugt mit senkrechter Federhaube Mounting position: any from G 1 ½" preferable with vertical bonnet
NW/DN |
socket |
socket |
b1 |
b2 |
h1 |
h2 |
KVS |
KG |
|
(thread) |
(solder) |
|
|
|
|
|
|
15 |
G ½" |
15 mm |
78 |
136 |
125 |
27 |
2,9 |
1,5 |
20 |
G ¾" |
22 mm |
78 |
145 |
125 |
27 |
3,9 |
1,8 |
25 |
G 1" |
28 mm |
90 |
160 |
125 |
29 |
5,4 |
2,3 |
32 |
G 1 ¼" |
35 mm |
100 |
178 |
125 |
47 |
6,1 |
4,0 |
40 |
G 1 ½" |
42 mm |
125 |
211 |
261 |
51 |
9,0 |
4,5 |
50 |
G 2" |
54 mm |
126 |
211 |
259 |
53 |
13 |
5,0 |
65 |
G 2 ½" |
- |
150 |
273 |
287 |
66 |
20 |
6,5 |
|